Erma ESP 85A
නිෂ්පාදිත රට
ජර්මනිය
ජර්මනිය
නිෂ්පාදකයාErma Werke
තවම පරිවර්තනය කර නැත — ඉංග්රීසියෙන් පෙන්වයි.
The ESP 85A is a target pistol produced by the German firearms company Erma.
Mainly used as a sporting arm, it is also found in service with security companies. It is available in two calibers, .22 LR (the preferred sporting or target model) and .32 S&W Long (7.65x23mm).
There is a difference between models marked ESP85 and ESP85A. Both versions could have been had with either the 100 mm (4-inch) or 153 mm (6-inch) barrel. There is even a shorter version, where the barrel flushes with the forward front of the slide. Some models, probably the ESP85, have a longer trigger bar than the ESP85A, and also with a different placed disconnector-notch in the slide. These part do not interchange.
The ESP85 also has a simpler, all-steel trigger, whereas the ESP85A has a forward-rearward adjustable plastic-steel trigger.
The feeding ramp between the ESP85 and ESP85A is also a bit different. While one may attach the barrel to the frame, the trigger will not work, because rearward movement will stop against the feeding-ramp. But a usable conversion can be made with the help of a gunsmith.
Although the precision is on par with any top-notch target pistols, the high bore axis will increase felt recoil...
Mainly used as a sporting arm, it is also found in service with security companies. It is available in two calibers, .22 LR (the preferred sporting or target model) and .32 S&W Long (7.65x23mm).
There is a difference between models marked ESP85 and ESP85A. Both versions could have been had with either the 100 mm (4-inch) or 153 mm (6-inch) barrel. There is even a shorter version, where the barrel flushes with the forward front of the slide. Some models, probably the ESP85, have a longer trigger bar than the ESP85A, and also with a different placed disconnector-notch in the slide. These part do not interchange.
The ESP85 also has a simpler, all-steel trigger, whereas the ESP85A has a forward-rearward adjustable plastic-steel trigger.
The feeding ramp between the ESP85 and ESP85A is also a bit different. While one may attach the barrel to the frame, the trigger will not work, because rearward movement will stop against the feeding-ramp. But a usable conversion can be made with the help of a gunsmith.
Although the precision is on par with any top-notch target pistols, the high bore axis will increase felt recoil...
